DrainEezy Fitting Kits
In this document you’ll find technical drawings of all the fitting kits available for Green Rhino Oil Removal Cartridges.
| Code | Description | Application |
|---|---|---|
| GRR035100FITK | Type 1 Fitting Kit – ABS 1.5″–1.5″ Male Threaded Fitting | Typically used on a concrete bunded area. |
| GRR035101FITK | Type 1 Fitting Kit – ABS 1.5″–2″ Threaded Bush | Typically used on a concrete bunded area with a 1.5″ fitting which requires a Type 2 cartridge (2″ fitting) for flow rate or capacity. |
| GRR035102FITK | Type 1 Fitting Kit – ABS 1.5″–1.5″ Male Thread Fitting XL | Typically used on a bund where timber poles are used as an edge with a liner system, and the extended length of pipe passes through the wall. |
| GRR035150FITK | Type 1 Fitting Kit – S/S 1.5″ – 1.5″ Male Thread Hex Nipple | Typically used on a steel earthed bunded area. |
| GRR035200FITK | Type 2 Fitting Kit – ABS 2″–2″ Male Thread Fitting | Typically used on a concrete bunded area. |
| GRR035201FITK | Type 2 Fitting Kit – ABS 2″–2″ Male Thread Fitting XL | Typically used on a bund where timber poles are used as an edge with a liner system, and the extended length of pipe passes through the wall. |
| GRR035250FITK | Type 2 Fitting Kit – S/S 2″–2″ Male Thread Hex Nipple | Typically used on a steel earthed bunded area. |
Type 1 Fitting Kit – ABS 1.5″–1.5″ Male Threaded Fitting
Type 1 Fitting Kit – ABS 1.5″–2″ Threaded Bush
Type 1 Fitting Kit – ABS 1.5″–1.5″ Male Thread Fitting XL
Type 1 Fitting Kit – S/S 1.5″–1.5″ Male Thread Hex Nipple
Type 2 Fitting Kit – ABS 2″–2″ Male Thread Fitting
Type 2 Fitting Kit – ABS 2″–2″ Male Thread Fitting XL
Type 2 Fitting Kit – S/S 2″–2″ Male Thread Hex Nipple
